||The CREATE TABLE statement does not support null columns in unique or primary key multicolumn constraints.
||You cannot create a unique or primary key constraint on a column that contains null values.
||SQLFire does not support sharing a single connection with multiple threads.
||Sharing a connection with multiple threads can lead to different kinds of problems in SQLFire. In particular if an operation is performed by one thread and a commit or rollback operation is performed by another thread, then a "LockNotHeldException" may be thrown during commit/rollback.
||Batch conflation can cause data mismatch when synchronizing to an external database or WAN site.
||If batch conflation is turned on, operations may be overidden while they are being applied to an external database (with DBSynchronizer) or propagated to a remote WAN site.
||Disable BATCH_CONFLATION if you configure an AsyncEventListener or a WAN gateway queue.
||ResultSet.get methods using column names can return an incorrect
column value if the same column name appears in more that one table
in the projection.
||If a ResultSet.getObject(), or other getter methods such as
getInt()/getString() are used to pass the column name instead of
index, and the column name appears more than once in the projection
for more than one table, then the result set returned for one of the tables may not be correct.
||If the same column name appears more than once in a projection for different tables, use ResultSet.get() methods and pass the column index in the projection.
||If a DDL is executed from a node and it goes down while
sending the DDL commit message to other nodes in the system, the
DDL may have been executed on some nodes but not on others.
||In rare scenarios, if the node firing a DDL fails while sending a DDL commit message to other nodes, the commit may go to some nodes but not to others. This may mean DDL will execute successfully on some nodes but not on others.
||You may need to manually restart
the nodes that have inconsistent data. If those nodes cannot be
easily determined, one option is to leave one locator running and bring down other nodes, so that on restart all nodes will
sync the DDLs against that locator.
||HA feature of DBSynchronizer may cause underlying DB to go out of synch due to re-application of DML operations.
||A ramification of high availability is that a DML operation may get reapplied to the database in case of failover of the node hosting primary DBSynchronizer. When a primary DBSynchronizer node fails while applying the operations of the batch, some DMLs of the batch may have already been applied. On failover, the new primary DBSynchronizer node would apply the failed batch, in the process reapplying some of the DML operations.In such cases, the database may or may not get out of synch with the SQLFire system, depending upon the nature of the DML operation, how it modifies the columns, and the presence or absence of constraints.
||To minimize the occurrence of this issue, have tables with primary key constraint defined.
||WHERE CURRENT OF clause not supported.
||vFabric SQLFire does not support the WHERE CURRENT OF clause with an UPDATE or DELETE statement to perform positioned updates with updateable cursors.
||Construct an explicit UPDATE or DELETE statment using a primary key filter. Or, use SELECT ... FOR UPDATE with the SQLFire peer driver to obtain an updateable result set.
||Parameter inference might interpret a bind value with different precision.
Parameter type inference in an expression is based on the net possible highest value that can be returned from that expression instead of the type of target column value. This might result in parameter value truncation.
For example, consider the following query: update trade.portfolio set subTotal = ? * qty.
If the qty column is of an Integer type and subTotal is a decimal(30,20) type, then SQLFire expects the parameter in the expression to be an integer. Performing stmtsetDecimal(1, 10.03) truncates the parameter value to 10.
|Use explicit cast operator for the parameter (?) to higher precision.
update trade.portfolio set subTotal = Cast(?) as decimal(30,20) * qty.
||SQLFire does not support setting or getting procedure parameters by name to CallableStatement.
||Trying to get or set parameters using the parameter name throws an unimplemented exception in SQLFire (SQLState 0A000).
||Get or set parameters by number rather than by parameter name.
||On a Windows system, if the home directory of a
user is on a share, in some cases sqlf tool may
fail to start and cannot create .sqlf.history in user's
||This issue has been observed in Windows environments where the sqlf
tool is running inside VMware
Fusion and using a share as user home directory. When
sqlf tries to create the .sqlf.history file in the
user home directory, it fails and the sqlf tool
fails to start.
||Disable the sqlf history by setting
".sqlf.history" Java system property to empty string,
or change the home directory to not point to a
||DBSynchronizer and WAN sites may go out of synch due to foreign key constraint violation.
||When a child table has a foreign key relationship with the parent table, it is possible that a sequence of inserts into the parent and child tables in the vFabric SQLFire system may reach the DBSynchronizer or WAN site in reverse order. This results in the child table record being inserted before the parent record in the WAN Site or external DB, which causes a foreign key constraint violation.
This situation can occur if insertion into parent and child tables is executed by separate threads. There is a window in which a DML operation executed on the vFabric SQLFire system has not yet been placed into the internal queue of the WAN or DBSynchronizer. The record is guaranteed to be put into the internal queue of the WAN or DBSynchronizer only after the DML operation is complete.
|To avoid this situation, the insertion into the parent and child tables should be done by the same thread.
||DDLs don't get relayed to the DBSynchronizer.
||DDLs like truncate table is not relayed to DBSynchronizer. Truncate table removes all the rows in the table. When executing a truncate table statement, AsyncEventListener callback will not be invoked.
||No total ordering guarantee for DML in separate threads
||SQLFire preserves the order of DML statements applied to the distributed system (and queued to AsyncEventListeners or remote WAN sites) only for a single thread of execution. Updates from multiple threads are preserved in first-in, first-out (FIFO) order. Otherwise, SQLFire provides no "total ordering" guarantees.
This means that if two separate threads concurrently update rows on a parent table and child table, respectively, the order in which SQLFire queues those updates to an AsyncEventListener or WAN gateway may not match the order in which the tables were updated in the main distributed system.
This mismatch can cause a foreign key constraint violation in a backend database (for example, when using DBSynchronizer) or in a remote WAN system that does not occur when the tables are initially updated. These types of "out of order" updates do not occur when multiple threads concurrently update the same key of a partitioned table.
|An application should always use a transaction for any operation that updates multiple rows.
||Many threads may hang
when performing concurrent inserts/updates/deletes on a table that has a global index or has child tables with foreign key references.
||Global index maintenance and foreign key dependency checks in SQLFire are performed from within the context of an insert/update/delete operation. This can cause the system to deadlock if there are many threads performing inserts/updates/delete concurrently due to product thread pools getting exhausted.
||Increase the thread pool size on the data store nodes using the java system properties "DistributionManager. MAX_PR_THREADS" and "DistributionManager. MAX_FE_THREADS" to at least twice the total number of threads that will be performing concurrent inserts/updates/deletes in the distributed system.
||Recursive triggers not supported.
||Two tables should not have triggers defined on each other such that they modify each other in their trigger action. Triggers defined on each other in this manner does not throw an exception but should not be done as a thread doing an update on one table may get stuck in infinite recursion.
||Sqlfire does not prevent a subquent node with different setting of sqlfire.sql-authorization from joining the cluster.
||A locator booted with sqlfire.sql-authorization property set to true could allow a new node to join the cluster even though its sqlfire.sql-authorization is set to false.
||sqlfire.sql-authorization property should be set consistently in the application.
||Presence of triggers that manipulate rows can cause data
inconsistency across WAN sites.
||If triggers are defined on tables configured for WA N, the DML generated as part of trigger action is also propagated to the remote WAN site. Thus the receiving WAN site will receive DML triggers twice. First the trigger is executed by the incoming user-initiated DML operation. The second trigger is the implicit trigger DML ( caused by the trigger onWAN site1) getting executed.
An example of a trigger action that can cause a problem is of the form , Col1 = Col1 +1. This will cause the Cl1 value to be incremented twice on the receiving WAN site.
||Do not create triggers on tables configured for WAN
propagation. Avoid trigger action that modifies the column
value relative to its existent value.
||If a user's access right to a database object is continuously granted and revoked, the user may not have the last assigned privilege.
||It is possible in some cases a user may not have the last assigned privilege, if the user's access right to a database object is continuously granted and revoked.
||Limit the frequency of granting and revoking a user's privilege to a database object.
||Inconsistent behavior of conflict exception (SQLState: X0Z02) thrown by product in transactions for parent and child row updates having foreign key relationship.
||SQLFire may throw a conflict exception (SQLState: X0Z02) when a parent table entry is being UPDATED in a transaction and a child table is inserting a row having a foreign key reference to that parent row. However, for cases when the primary key is not the same as partitioning key in the parent table, the product might not throw a conflict exception.
||An application should not treat conflicts as unexpected during transactions when the parent table is being updated while inserts are in progress on a child table that has foreign key reference to the parent.
||RENAME TABLE throws unsupported exception (SQLState 0A000).
||SQLFire does not support RENAME TABLE operation currently.
||SQLFire does not support ResultSets with holdability as HOLD_CURSORS_ OVER_COMMIT
||Creating a JDBC Statement with ResultSet holdability as ResultSet. HOLD_CURSORS_OVER_COMMIT is not supported in SQLFire although the product does not throw an exception during creation of such a statement.
||SQLFire does not support the ESCAPE keyword in the LIKE clause.
||The ESCAPE keyword in the LIKE clause is currently unsupported in SQLFire although it does not throw an exception.
||SQLFire primary member failures can lead to data inconsistency issues.
||During primary to secondary event propagation, the failure of the primary SQLFire member can cause table and global index data inconsistency issues.
||Uncertainty whether SQLException with SQL State of X0Z09 during DML operation allows the operation to execute successfully.
||Consider a system with persistent partitioned table. If the system's nodes are being brought down ( or a node fails) and DML operations are occurring concurrently, the DML operation may throw SQLException with Sql state of X0Z09. In such cases there will be uncertainty about the outcome of the operation. The operation may or may not have persisted the data.
||In the event of graceful shutdown, stop the nodes only when all the DML operations have terminated.
In case of SQLException with state X0Z09 with node failures, verify whether the data got persisted successfully, and accordingly the application can re-execute the operation or not.
||Updateable result sets not supported JDBC client driver.
||You cannot use updateable result sets when you are connected with the SQLFire JDBC client driver. Updateable result sets are supported only when using SELECT ... FOR UPDATE with the SQLFire JDBC peer driver.
||Unexpected NoDataStoresAvailable exception.
||In rare cases, an operation receives a NoDataStoreAvailableException while recovering a failed member with persistent tables, even though the operation should succeed with other running data stores.
||DDLUtils cannot import tables having circular foreign key dependencies.
||Circular foreign key dependencies are not yet supported in SQLFire.
||Inconsistency between client driver and peer driver when displaying boolean column values.
||The peer driver displays boolean column values as true or false while the client driver shows them as 1 or 0.
||A DML operation
that gets Offline Exception X0Z09 may not
||If all copies of a bucket to host the affected data by a DML operation are gone, the DML operation gets Offline Exception (X0Z09) if the table is persistent. The application should not assume that DML operation is failed, as it is possible the operation is persisted before the exception is thrown. This piece of data is recovered from persistent table once the data node is rebooted.
||Query plan sometimes omits peer client member id.
||Query plans for statements executed from peer clients can sometimes substitute the statement id for the peer client member id in the portion of the query plan that was executed on the peer client itself.
||CAST may not be honored in aggregates.
||In queries having aggregates, the CAST operator on the aggregated value may not be honored by SQLFire in some cases. For example:
select cid, cast(max(price) as decimal(30,1)) from trade.txhistory where tid =? GROUP BY cid, type" against table
txhistory with datatype of price decimal(30,20);
gives second value as decimal(30,20) instead of decimal (30,1).
||Hang in primary rebalancing.
||In rare cases, rebalancing primaries may lead to a hang in BucketAdvisor.becomePrimary on one of the members.
||Stop the hung member and restart it.
||When using DBSynchronizer, if multiple potentially
overlapping DMLs are executed in different
transactions executing concurrently, then they may
result in potentially different rows being affected in
SQLFire and backend DB.
||In a situation where multiple DMLs are executing concurrently that potentially overlap in SQLFire but do not actually conflict, then replay of those DMLs using DBSynchronizer may lead to different rows being affected in the backend DB as compared to SQLFire.
As an example consider a bulk delete that uses some criteria on column and an update that changes the same column:
update foo set col1=val1 where col1=val0;
delete from foo where col1=val1;
||DBSynchronizer and automatic generation of identity columns in third party database
||If cached tables require automatic generation of identity column values, then you should use SQLFire to automatically generate the key values but disable generated keys in the backend database. If the backend database also generates key values, then inserts can fail if SQLFire has already generated the key.
||Disable auto generated keys in the backend database.
||SECMEC_USRSSBPWD is not supported with the SQLFire thin client driver.
||While connecting via a thin driver, SQLFire currently doesn't work properly with Strong Password Substitute DRDA security mechanism.
||Non-prepared stored procedures perform slower than prepared statements.
||Only insert, update, delete, and select statements with constants are considered for pattern matching, and avoid complete compilation. Stored procedures with constant parameters (without a prepare call) may be slow due to complete compilation (parsing and optimization).
||Configure the stored procedure with dynamic parameter and bind constant values across multiple executions.
||If a DML operation is cancelled due to low memory with SQLState XCL54, the DML operation may have been successful before the low memory condition is hit.
||In some cases it is possible that DML operations fail with low memory condition (SQLState: XCL54), but the operation may still have completed when the exception is thrown. Users should not assume that a low memory exception always implies that the operation was unsuccessful. Check for the changes explicitly, if required.
||Use transactions when it is expected that DMLs may take substantial memory and can get cancelled due to low memory conditions.
||Index Creation with Concurrent DML on WAN Causes Incorrect Result Sets
||In a WAN configuration, if you attempt to create an index on a table while performing concurrent DML statements, queries against the table return incorrect result sets.
||Some MBeans not available in JMX Agent.
||Certain SQLFire MBeans are not served from the SQLFire JMX Agent in this release. These MBeans include:
- JDBCMBean for montoring the JDBC driver version information.
- ManagementMBean for monitoring the management status.
- NetworkServerMBean for monitoring statistics associated with a SQLFire member's Network Server (client) connections.
- VersionMBean for monitoring the SQLFire member version and product information.
|To access any of the
listed SQLFire MBeans, you must connect directly to the
local SQLFire process rather than to the SQLFire Agent.
For example, with jconsole you would need to connect
directly to the local process id of the SQLFire member
(such as com.vmware.sqlfire.tools.internal .SqlfServerLauncher) rather than connecting to the Agent as a remote process.
||Carriage return (\n) character is not recognized in the sqlf command line.
||A carriage return/line feed character (\n\r) is not recognized in the sqlf command line utility.
For example, a sqlfire comment line is terminated by a new line. But a \n won't be recognized in the prompt.
SELECT TABLENAME from -- SQLFIRE-PROPERTIES statementAlias=My_QUERY \n SYS.SYSTABLES;
||Insert an explicit CR where needed,
sqlf> SELECT TABLENAME from -- SQLFIRE-PROPERTIES statementAlias=My_QUERY
||TotalExecutionTime statistics might show incorrect values.
||TotalExecutionTime statistics might show a large value
||java.lang.ClassCast Exception: FormatableBitSet cannot be cast
com.vmware.sqlfire. internal.catalog.types. ReferencedColumns DescriptorImpl
||A very rare ClassCastException saying FormatableBitSet or
GenericPreparedStatement cannot be cast to
com.vmware.sqlfire.internal.catalog.types. ReferencedColumnsDescriptorImpl is seen when preparing a query on remote node.
Users will need to re-execute the statement when this exception occurs.
||Subquery may affect performance of other dml operations.
||Subquery uses more system resources due to the extra hop to evaluate the subquery in multiple data stores, when the involved region is partitioned. In some extreme cases, with large number of subqueries and limited system resources, the performance of query processing will be affected. Users are advised to limit the number of subqueries if at all possible.
||No query plans for buld
insert/update/delete with or without
subqueries affecting multiple rows.
||Query plan may not be returned for a bulk
insert/update/delete operation that gets
distributed to one or more members.
||Queries may occasionally lose connection when node goes down
while iterating query results.
||When a node goes down during query results iteration, SQLFire throws back a node failure exception (SQLState: X0Z01) to
the user indicating that the results may not be complete and user
may need to re-execute the query. When using the thin client driver,
it may occasionally end up losing the Connection object itself, and
so user may need to recreate the connection.
||When handling a node failure exception (SQLStatE: X0Z01) also
check if connection has gotten closed using Connection.isClosed()
and recreate the connection if that be the case.
||A system user's credentials may fail to start a new sqlfire node.
||When the first locator is booted, a list of username/password credentials could be set. These credentials could be used to boot new sqlfire nodes to join in the cluster. When booting new nodes using these credentials, sometimes they may be rejected by sqlfire.
||Application could set only one username/password pair to start all locators and nodes in the cluster.