[an error occurred while processing this directive] [an error occurred while processing this directive]
VMware

VMware Workstation 3.2

Features | Documentation | Knowledge Base | Discussion Forums

previous Prev   Contents   Last   Next next

Do Not Use Windows 2000, Windows XP and Windows .NET Server Dynamic Disks as Raw Disks

Do Not Use Windows 2000, Windows XP and Windows .NET Server Dynamic Disks as Raw Disks

Windows 2000, Windows XP and Windows .NET Server support a new disk type called a dynamic disk. Dynamic disks use a proprietary Microsoft format for recording partition information. This format is not publicly documented and thus is not supported for use in raw disk configurations under VMware Workstation.

Windows 2000, Windows XP and Windows .NET Server also support the older type of partition table, on what are designated as basic disks.

You can use the disk management tool to check the type of disk used on your Windows 2000, Windows XP or Windows .NET Server host and, if it is a dynamic disk, change it to basic.

Caution: If you change a dynamic disk to a basic disk, you lose all data on the disk.

Use this procedure to convert a dynamic disk to a basic disk.

  1. Open the disk management tool.

    Start > Settings > Control Panel > Administrative Tools > Computer Management > Disk Management

  2. Delete all logical volumes on the disk. This destroys all data on the disk.

  3. Right-click the disk icon and select Revert to Basic Disk.

  4. Create the partitions you want on the disk.

previous Prev   Contents   Last   Next next