VMware Workstation 3.2
Bridged networking connects a virtual machine to a network using the host computer's Ethernet adapter.
Bridged networking is set up automatically if you select Use bridged networking in the New Virtual Machine Wizard on Windows hosts or Bridged networking in the Configuration Wizard on Linux hosts. This selection is available only if you enable the bridged networking option when you install VMware Workstation.
If your host computer is on an Ethernet network, this is often the easiest way to give your virtual machine access to that network.
If you use bridged networking, your virtual machine needs to have its own identity on the network. For example, on a TCP/IP network, the virtual machine needs its own IP address. Your network administrator can tell you whether IP addresses are available for your virtual machine and what networking settings you should use in the guest operating system. Generally, your guest operating system may acquire an IP address and other network details automatically from a DHCP server, or you may need to set the IP address and other details manually in the guest operating system.
If you use bridged networking, the virtual machine is a full participant in the network. It has access to other machines on the network and can be contacted by other machines on the network as if it were a physical computer on the network.
Be aware that if the host computer is set up to boot multiple operating systems and you run one or more of them in virtual machines, you need to configure each operating system with a unique network address. People who boot multiple operating systems often assign all systems the same address, since they assume only one operating system will be running at a time. If you use one or more of the operating systems in a virtual machine, this assumption is no longer true.
If you make some other selection in the New Virtual Machine Wizard (on Windows hosts) or Configuration Wizard (on Linux hosts) and later decide you want to use bridged networking, you can make that change in the Configuration Editor (Settings > Configuration Editor). For details, see Changing the Networking Configuration.
Note: You cannot use bridged networking if your host has a wireless NIC installed. If you want to run virtual machines on a host that uses wireless NICs, you need to configure your virtual machines to use NAT.